VC200手机综合测试仪是世界上第一台 Go/No—Go W—CDMA/GSM手机测试仪！
Features
The VC200 is the ideal tool for testing GSM/WCDMA Mobiles during manufacture, maintenance, servicing, troubleshooting and point of sale because of these many features:
- Low cost GSM/W-CDMA mobile phone tester
- Supports multiple GSM & W-CDMA frequency bands
- Signaling tester mode - Auto test mode/Manual test mode
- Tx/Rx Tester mode
- Suitable for manufacture, maintenance and servicing
- Compact and lightweight
Support GSM & W-CDMA full frequency bands
- W-CDMA(UMTS)
- Band I
- Band II
- Band III
- Band IV
- GSM
- GSM850
- P-GSM
- E-GSM
- R-GMS
- DCS1800
- PCS1900
Signaling Tester Mode
In signaling tester mode, protocol software establishes a connection call with the mobile phone and performs radio characteristics tests (conforming to the 3GPP TC protocol).
Test items
- Registration
- Call setup from UE
- Call setup from NW
- Release from NW
- Release from UE
- Frequency handover
- Speech test (Sound loop back)
| |
(W-CDMA)
- Max./Min. output power
- Open loop power control
- Inner loop power control
- Modulation accuracy
- Frequency error
- Reference sensitivity
- Maximum input reception
| (GSM)
- Output power
- Phase error
- Burst timing
- Frequency Error
- Reception quality (Report from UE)
- Reception level (Report from UE)
- Loopback BER
|
Tx/Rx Tester Mode
In Tx/Rx tester mode, each of the following operations is carried out simultaneously without activating the protocol (no signaling): transmission of downlink Layer 1 signals to the mobile phone, reception of uplink signals from the mobile phone, and measurements of the transmitter characteristics of the mobile phone. You can perform a receiver characteristics test (Rx test) and a transmitter characteristics test (Tx test) on the mobile phone without signaling.
Auto Test Mode
In Auto Test Mode, all tests are carried out automatically, requiring only minimal button operation on the mobile phone.
